Sky T100K mất boot, Sky A840S mất boot. 92 thái hà unbrick cứu boot thành công

Cứu boot SKY T100K, Repair boot SKY T100K, Unbrick Sky T100K ok.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Pantech Sky T100K mất boot V1.0.4695.59278]

Connecting to the dead body...OK
Detected dead body ID: 0x104200E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (KYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (KYL00M, 0x000000080000 Bytes = 0.50 MB)

Flashing the dead body...OK
Resurrection complete!

Cứu boot SKY A840S, Repair boot SKY A840S, Unbrick Sky A840S ok.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Pantech Sky A840S mất boot V1.0.4717.58143]

Connecting to the dead body...OK
Detected dead body ID: 0x406B10E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x0003A3E00000 Bytes = 14.56 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG2GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!